here at p.13 we do sumtimes get involved in lambretta projects -
andrews servetta , newly painted , gloss and mat

looking good si, nearly there

bits a bobs , powder coating for stevens street racer project ;]

circa 1940 rear light from the US of A
now blasted next a few coats of mat laquer

comin on

ghost on the machine

mudguard on ;]

saturday afternoon fresh from the paint shop, rods vbb is back. im loving this. monday we start the build ;] . two parts chemical , one part rain and loads of laquer

steven from manchesters build, a lot of cutting and re shaping the belly pan fits, next up weld on fixing points - almost ready for the paint shop ;]

after a bit of fettling , stevie gets a new guard

inches away from completion. light, seat and speedo

alternate means

rich,s inline spare wheel bracket returns from the powder coaters ;]

the lens, solid glass, beautiful pattern

1940s rear light , a bit rough but will save

the gas bike lives again, well nearly

detail of the gas bike, as she grows

the gas

simons vbb, the gas bike returns after a long wait , lots of laquer ;]

rods vbb, detail shot

front disc brake, dry build rods vbb

detail of texture, rods vbb

chemicals and some rain, rods vbb , nearly ready for laquer

as suggested by nadine this didnt come out of the canal, but with a bit of time, patience and love ....
watch this space

stevens smallie, hydraulic cut and welded , cables and loom gone, ready to blast , bare metal, graphics
and laquer comin up

rods vbb returns from the blaster, super straight, rust , flames and laquer coming up

rods motor nearly done, t5 172

roberts bike all done , city tune all good

red oxide and blue mmmmmm simons vbb - back from the painter next week , piks to follow ;]

simons vbb gets a long over due strip paint and laquer

thanks mikie ;]

chris,s bike arrives back in the workshop, welding, blasting and powder coating all done.
much cutting and shaping for the disc brake conversion and a shortened bitubo front shock.

roberts et3 gets a long over due motor rebuild, city tune

rods vbb back from the panel beater. it sits outside my nearly but not quite ready workshop

after a sand blast, the chrome has almost disappeared , interesting , powder coat or laquer mmmm

a bit of masking tape, some metal tube and a bit of imagination ;]

at steves request, the panel is cut of to expose the engine, the carb manifold also turned cut and welded.
next up cross bars on the inside of the frame

the vbb gets a master cylinder after a bit of welding, cutting and filing.
note the burnt paint on the headset, think we might have to keep that

phase one, rods vbb gets stripped, t5 motor, disc brake etc coming up

detail of rich,s , before laquer and build

ryan,s super, london. 166, px motor, disc brake ...

in progress ......

iow this year, THE 13. new paint this winter mee thinks
my bike ;]

rich from bristol. just before it was finished
100 sport, malossi 136, reed, pm pipe and power jet ;]

simons gas, gets a make over - well over due, a long time coming

neils et3, london 18bhp

rude boy !

vbb, disc , px motor polini 180

malos 136, 16bhp, my old ride